Xantrex/Trace Engineering Suggested Consumer Retail Price List TABLE OF CONTENTS INVERTERS & ACCESSORIES SW SERIES PS SERIES SW & PS SERIES ACCESSORIES Please contact us for our current discounts or package pricing. SUN TIE XR REMOTE CONTROLS/METERS PV SERIES POWER METERS DR-SERIES SYSTEM MONITORING DR-SERIES ACCESSORIES COMPLETE POWER SOLUTIONS TIGER - TS SERIES POWER PANEL SYSTEMS Power Panel Options UX-SERIES THREE PHASE SW POWERMODULE TS & UX ACCESSORIES XPOWER ELECTRONIC BACKUP  PROSINE SERIES INVERTERS POWER GENERATORS PROSINE SERIES INVERTER/CHARGERS BATTERY CHARGERS PORTAWATTZ HIGH FREQUENCY SERIES MULTI-STAGE BATTERY CHARGERS CHARGE CONTROLLERS SOLAR CHARGE CONTROLLERS ACCESSORIES DC DISCONNECT AND OPTIONS TCB-PV COMBINER BOX GROUND FAULT PROTECTION BATTERY CABLES FUSE BLOCKS AND FUSES T240 AUTOTRANSFORMER

Note: All prices and specifications are subject to change without notice.

SW-SERIES		Top
The SW Series is the most advanced, easy-to-use sine wave power conversion product available in the world today. Ideal for use in primary (off grid), net metering (grid tie) and backup power applications, the SW Series sets the standard for high performance and power reliability with over 30,000 units in service worldwide. It is fully compatible with grid power, generators, and renewable energy systems. The SW Series is Listed by UL to UL 1741 - 1999, to CSA C22.2 No. 107.1-95, and is IEEE 929 compliant. Wall or shelf mount: 15" high (38 cm) x 22.5" wide (57.2 cm) x 9" deep (22.8 cm)  Unit weight: 90, 105 or 136 lb (42, 48 or 63 kg), depending on model  Shipping size: 15.5" high (39.5 cm) x 27" wide (68.6 cm) x 20.5" deep (52 cm)  Shipping weight: 96, 111 or 143 lb (44, 50 or 65 kg), depending on model
Model	Description	List Price
North American Applications
SW4024	4.0 kva - 24 vdc input, 120 vac 60 Hz output with 120 amp charger and 60 amp AC transfer relay	$3495.00
SW4048	4.0 kva - 48 vdc input, 120 vac 60 Hz output with 60 amp charger and 60 amp AC transfer relay	$3495.00
SW5548	5.5 kva - 48 vdc input, 120 vac 60 Hz output with 70 amp charger and 60 amp AC transfer relay	$3995.00
European Applications
SW3024E	3.3 kva - 24 vdc input, 230 vac 50 Hz output with 100 amp charger and 30 amp AC transfer relay	$3495.00
SW3048E	3.3 kva - 48 vdc input, 230 vac 50 Hz output with 50 amp charger and 30 amp AC transfer relay	$3495.00
SW4548E	4.5 kva - 48 vdc input, 230 vac 50 Hz output with 60 amp charger and 30 amp AC transfer relay	$3995.00
Japanese Applications
SW3024J	3.3 kva - 24 vdc input, 105 vac 50 Hz output with 100 amp charger and 60 amp AC transfer relay	$3495.00
SW3048J	3.3 kva-48 vdc input 105 vac 50 Hz output with 50 amp charger and 60 amp AC transfer relay	$3495.00
SW4024K	4.0 kva - 24 vdc input, 105 vac 60 Hz output with 120 amp charger and 60 amp AC transfer relay	$3495.00
SW5048K	5.0 kva - 48 vdc input, 105 vac 60 Hz output with 60 amp charger and 60 amp AC tranfer relay	$3995.00
Peru and Philippines Applications
SW4024W	4.0 kva - 24 vdc input, 220 vac (2 wire) 60 Hz output with 120 amp charger and 30 amp AC transfer relay	$3495.00
Display
SW-D	Display SW Series inverter (non-operational) for showroom (price not discountable)	$175.00
PS Series		Top
The PS Series is based on the SW Series and is an excellent entry level sine wave inverter/charger. It has a three-stage battery charger and automatic AC transfer relay, is UL Listed and responds to all of your stand-alone, backup power applications. With the optional remote control, all of the SW Series programming options and settings are accessible. Wall or shelf mount: 15.25" high (38.7 cm) x 22.5" wide (57.1 cm) x 6.5" deep (16.5 cm)  Unit weight: 80 lb (36.4 kg)  Shipping size: 20" high (50.8 cm) x 26" wide (66 cm) x 12.75" deep (32.2 cm)  Shipping weight: 88 lb (40 kg)
Model	Description	List Price
North American Applications
PS2512	2.5 kVA - 12 VDC input, 120 vac 60 Hz output with 130 amp charger and 30 or 50 amp selectable AC transfer relay	$2,165.00
PS2524	2.5 kVA - 24 VDC input, 120 VAC 60 Hz output with 65 amp charger and 30 or 50 amp selectable AC transfer relay.	$2,165.00
European Applications
PS2212E	2.2 kVA - 12 VDC input, 230 vac 50 Hz output with 100 amp charger and 15 or 30 amp selectable AC transfer relay	$2,165.00
PS2524E	2.5 kVA - 24 VDC input, 230 VAC 50 Hz output with 65 amp charger and 15 or 30 amp selectable AC transfer relay.	$2,165.00
Display
PS-D	Display PS Series inverter (non-operational) for showroom (price not discountable)	$135.00
SW & PS Series Accessories		Top
Model	Description	List Price
GSM	Gen Start Module - allows auto generator start with the PS Series inverter	$159.00
ALM	Aux Load Module - provides voltage controlled relays with the PS Series inverter	$159.00
SWCA	Sine wave communications adapter allows PC connection and monitoring of up to eight SW or PS Series inverters - includes adapter, DOS based software, 50' (16 m) of cable and DB9 connector	$175.00
SWRC	Full function remote control with LCD display for all SW and PS Series inverters. 25' (8 m) cable standard	$295.00
SWRC/50ft	As above with 50' (16 m) cable (specify /50 when ordering)	$329.00
SWI/PAR	Sine wave paralleling kit - connects two identical SW & PS inverters together for twice the output power at the same voltage (North America only)	$345.00
SWI/PAR/E	Same as above for "E" & "W" version inverters	$345.00
SWI	Series stacking interface for two identical SW and PS inverters, provides 120/240 VAC, 3 wire 240 VAC, doubles output (not for use with "E" & "W" models)	$45.00
SWCB	Conduit box for SW Series - fits on the DC end of the inverter (1/2", 3/4" and 2" knockouts) - adds 6" (15 cm)	$94.00
PSCB	Conduit box for PS Series - fits on the DC end of the inverter (1/2", 3/4" and 2" knockouts) - adds 6" (15 cm)	$94.00
SUN TIE XR		Top
The UL listed, high frequency Sun Tie XR™ Series inverter is designed to be the link between your solar array and the utility. With Sunsweep™ maximum power point tracking (MPPT), LCD user display, combined AC/DC surge protection, and DC and AC input/output breakers, the Sun Tie XR™ sets the standard for fast, easy, low cost installation. UL Listed to UL 1741 - 1999 and cUL Listed to CSA C22.2 No 107.1-95. Not designed for use with batteries. Wall or shelf mount: 33.25" high (83.1 cm) x 13.25" wide (33.8 cm) x 5.3" deep (13.25 cm)  Unit weight: 35 lb (16 kg)  Shipping size: 37.75" high (94.4 cm) x 15.75" wide (39.4 cm) x 9.5" deep (23.8 cm)  Shipping weight: 40 lb (18 kg) shown with optional rain shield
Model	Description	List Price
STXR2500	2.5 kVA - 42-85 VDC input, 240 VAC 60 Hz output, includes six circuit combiner board, PVGFP	$2759.00
STXR2000	2.0 kVA - 42-85 VDC input, 240 VAC 60 Hz output	$2259.00
STXR1500	1.5 kVA - 42-85 VDC input, 240 VAC 60 Hz output, includes six circuit combiner board, PVGFP	$2239.00
STXR1000	1.0 kVA - 42-85 VDC input, 240 VAC 60 Hz output	$1849.00
STRS	Protective rain shield, required for installation outdoors (shipped separately)	$125.00
STRM	Remote kilowatt hour meter for the Sun Tie XR, with kilowatt hour history	$179.00
Display
ST-D	Display ST Series inverter (non operational) for showroom (price not discountable)	$175.00
PV SERIES		Top
The PV Series is ideal for commercial or small utility scale solar installations. Designed for high voltage arrays and three-phase industrial power in 10, 15 and 20 kW versions. This product is intended to bring the advantages of standard design and prequalification of UL and IEEE requirements to the industrial system level, reducing system design, installation, and site certification costs. The PV Series includes automatic maximum power point tracking and a wide variety of custom definable parameters and communication options via a standard user interface. It is intended for installation by PV contractors with utility or industrial scale experience. Not designed for use with batteries. Wall mount: 26" high (65 cm) x 16" wide (40 cm) x 11" deep (27.5 cm)  Unit weight: 75 lb (34 kg)  Shipping size: 30" high (75 cm) x 20" wide (44 cm) x 15" deep (37.5 cm)  Shipping weight: 86 lb (38.6 kg)
Model & Description		List Price
Grid Tie Photovoltaic Inverter - 300 - 480 VDC input, 120/208 VAC three-phase output - 5, 10 and 15 kW models		PV price and accessory list available to PV contractors
DR-SERIES		Top
The DR Series inverter is a robust, proven performer designed for remote, medium sized, off grid and utility backup systems in both residential and commercial applications. This modified sine wave inverter comes with a three-stage battery charger and automatic AC transfer relay. Wall or shelf mount: 7.3" deep (18.4 cm) x 21.5" wide (54.6 cm) x 8.5" high (21.6 cm)  Unit weight: 35, 45 or 49 lb (16, 21 or 23 kg), depending on model  Shipping size: 12" deep (30.5 cm) x 25" wide (63.5 cm) x 13" high (33 cm)  Shipping weight: 38, 48 or 52 lb (17, 22 or 24 kg), depending on model
Model	Description	List Price
North American Applications
DR1512	1.5 kva 12vdc input 120vac 60Hz output with 70 amp charger and 30 amp AC transfer relay.	$1029.00
DR1524	1.5 kva 24vdc input 120vac 60Hz output with 35 amp charger and 30 amp AC transfer relay.	$979.00
DR2412	2.4 kva 12vdc input 120vac 60Hz output with 120 amp charger and 30 amp AC transfer relay.	$1395.00
DR2424	2.4 kva 24vdc input 120vac 60Hz output with 70 amp charger and 30 amp AC transfer relay.	$1395.00
DR3624	3.6 kva 24vdc input 120vac 60Hz output with 70 amp charger and 30 amp AC transfer relay.	$1595.00
European Applications
DR1512E	1.5 kva 12vdc input 230vac 50Hz output with 70 amp charger and 15 amp AC transfer relay.	$1029.00
DR1524E	1.5 kva 24vdc input 230vac 50Hz output with 35 amp charger and 15 amp AC transfer relay.	$1029.00
DR1548E	1.5 kva 48vdc input 230vac 50Hz output with 15 amp charger and 15 amp AC transfer relay.	$1295.00
DR2424E	2.4 kva 24vdc input 230vac 50Hz output with 70 amp charger and 15 amp AC transfer relay.	$1395.00
Japanese Applications
DR1512J	1.5 kva 12vdc input 105vac 50Hz output with 70 amp charger and 30 amp AC transfer relay.	$1029.00
DR1524J	1.5 kva 24vdc input 105vac 50Hz output with 35 amp charger and 30 amp AC transfer relay.	$1029.00
DR2424J	2.4 kva 24vdc input 105vac 50Hz output with 70 amp charger and 30 amp AC transfer relay.	$1395.00
DR1512K	1.5 kva 12vdc input 105vac 60Hz output with 70 amp charger and 30 amp AC transfer relay.	$1029.00
DR1524K	1.5 kva 24vdc input 105vac 60Hz output with 35 amp charger and 30 amp AC transfer relay.	$1029.00
DR2424K	2.4 kva 24vdc input 105vac 60Hz output with 70 amp charger and 30 amp AC transfer relay.	$1395.00
Peru and Philippines Applications
DR1512W	1.5 kVA-12 VDC input 220 VAC 60 Hz output with 70 amp charger and 15 amp AC transfer relay	$1029.00
DR1524W	1.5 kVA-24 VDC input 220 VAC 60 Hz output with 35 amp charger and 15 amp AC transfer relay	$1029.00
Display
DR-D	Display DR Series inverter (non-operational) for showroom (price not discountable)	$95.00
DR-Series Accessories		Top
Model	Description	List Price
DRI	Stacking interface for two DR inverters, providing 120/240 VAC, 3 wire 240 VAC (doubles output) includes two 1.5' battery cables and the stacking comm. cable (not for use with "E" or "W" models)	$85.00
DRCB	Conduit box for all DR's - fits either end - AC/DC (1/2", 3/4" and 2" knockouts), adds 6" (15 cm)	$69.00
BTS/15	Battery Temperature Sensor for DR, SW, PS and UX Series inverters and charge controllers with 15' (5 m) cable (included standard on SW and PS Series)	$29.00
BTS/35	Battery Temperature Sensor with 35' (11 m) cable (included standard on all power panel systems)	$32.00
RC8/50	Remote on/off control with status LED indicator for all DR, PS, TS and UX Series -includes 50' (16 m) cable	$69.00
DR-D	Remote on/off control with status LED indicator for all DR, PS, TS and UX Series - includes 100' (30.4 m) cable	$94.00
THREE PHASE SW POWER MODULE		Top
Three-phase, commercial scale systems can now enjoy the benefits of the world famous SW Series. From remote ranches to eco-tourist hotels, this system delivers all of the features and performance of the SW at continuous power levels from 9 to 16.5 kW. Excellent for large, hybrid generator systems, each SW delivers reliable, independent power to each phase, allowing generator balancing, plus 24-hour power even when the gen-set is off. Generator run time can be reduced or eliminated by adding a renewable power source such as solar panels or wind generators. For stand-alone and back up applications. Although designed for easy installation, we recommend that power system professionals install all three-phase systems. Floor Mount: 57" high (143 cm) x 34" wide (85 cm) x 19" deep (48 cm)  Unit weight: 527 or 560 lb (240 or 255 kg), depending on model
Model	Description	List Price
North American Applications
PM-SW5548/3PH	120 Y 208 VAC 60 Hz 16.5 kVA (5.5 kVA per phase)	$17125.00
PM-SW4048/3PH	120 Y 208 VAC 60Hz 12 kVA (4.0 kVA per phase)	$15457.00
European Applications
PM-SW4548E/3PH	230 Y 400 VAC 50 Hz 13.5 kVA (4.5 kVA per phase)	$17125.00
PM-SW3048E/3PH	230 Y 400 VAC 50 Hz 10.0 kVA (3.3 kVA per phase)	$15457.00
SW4548E3PH	4.5 kVA 48 VDC 230 VAC 50 Hz (inverter only, provides single leg of three phase output)	$4095.00
SW3048E3PH	SW3048E3PH 3.3 kVA 48 VDC 230 VAC 50 Hz (inverter only, provides single leg of three phase output)	$3595.00
SWI/3PH	Three-phase stacking interface cable	$125.00
3025	Three phase line monitor	$750.00
TIGER - TS SERIES		Top
Modified sine-wave inverter with optional 3-stage battery charger & automatic transfer relay. Designed for small off-grid and utility backup applications. Shelf or wall mount: 5.75" high (14.6 cm) x 10.5" wide (26.7 cm) x 8" deep (20.3 cm)  Unit weight: 16 to 17 lb (7.3 to 7.37 kg)  Shipping size: 12" high (30.5 cm) x 15" wide (38 cm) x 13" deep (33 cm)  Shipping weight: 19 to 20 lb (8.6 to 9.1 kg)
Model	Description	List Price
North American Applications
TS512SB	500 VA - 12 VDC input, 120 VAC 60 Hz output with 15 amp charger and 15 amp AC transfer relay	$495.00
TS524SB	500 VA - 24 VDC input, 120 VAC 60 Hz output with 7.5 amp charger and 15 amp AC transfer relay	$495.00
TS812SB	800 VA - 12 VDC input, 120 VAC 60 Hz output with 25 amp charger and 15 amp AC transfer relay	$595.00
European Applications
TS412ESB	400 VA - 12 VDC input, 230 VAC 50 Hz output with 15 amp charger and 15 amp AC transfer relay	$495.00
TS424ESB	400 VA - 24 VDC input, 230 VAC 50 Hz output with 7.5 amp charger and 15 amp AC transfer relay	$495.00
UX-SERIES		Top
The UX Series is a modified sine wave inverter with an optional 3-stage battery charger and automatic transfer relay. Simple to operate, this inverter is designed to fit perfectly into small to medium off grid and utility backup applications. UL listed. Shelf or wall mount: 6" high (15.2 cm) x 10.25" wide (26 cm) x 15.5" deep (39.4 cm)  Unit weight: 25 to 36 lb (11.4 to 16 kg)  Shipping size: 10.5" high (26.25 cm) x 13" wide (32.5 cm) x 19" deep (47.5 cm)  Shipping weight: 30 to 40 lb (13.6 to 18.2 kg)
Model	Description	List Price
North American Applications
UX612	600 VA - 12 VDC input 120 VAC 60Hz output	$595.00
UX612SB	600 VA - 12 VDC input 120 VAC 60Hz output with 25 amp charger and 30 amp AC transfer relay	$695.00
UX1112	1.1 kVA - 12 VDC input, 120 VAC 60 Hz output	$795.00
UX1112SB	1.1 kVA - 12 VDC input, 120 VAC 60 Hz output with 35 amp charger and 30 amp AC transfer relay	$895.00
UX1412	1.4 kVA - 12 VDC input, 120 VAC 60 Hz output	$885.00
UX1412SB	1.4 kVA - 12 VDC input, 120 VAC 60 Hz output with 50 amp charger and 30 amp AC transfer relay	$985.00
European Applications
UX512E	500 VA - 12 VDC input, 230 VAC 50 Hz output	$595.00
UX512ESB	500 VA - 12 VDC input, 230 VAC 50 Hz output with 25 amp charger and 15 amp AC transfer relay	$695.00
UX1112E	1.1 kVA - 12 VDC input, 230 VAC 50 Hz output	$729.00
UX1112ESB	1.1 kVA - 12 VDC input, 230 VAC 50 Hz output with 50 amp charger and 15 amp AC transfer relay	$829.00
Display
UX-D	Display UX Series inverter (non-operational) for showroom (price not discountable)	$70.00
TS & UX ACCESSORIES		Top
Model	Description	List Price
BTS/15	Battery Temperature Sensor for DR, SW, PS and UX Series inverters and charge controllers -15' (5 m) cable	$29.00
BTS/35	Battery Temperature Sensor with 35' (11 m) cable (included standard on all power panel systems)	$32.00
RC8/50	Remote on/off control with status LED indicator for all DR, PS, TS and UX Series - includes 50' (16m) cable	$69.00
RC8/100	Remote on/off control with status LED indicator for all DR, PS, TS and UX Series - includes 100' (30.4 m) cable	$94.00
SYSTEM MONITORING		Top
A battery system monitor is a value for any off grid or backup power installation. Depending on model, you can display volts, amps, amp-hours, battery time remaining, or even battery charging efficiency and average depth of discharge.
Model	Description	List Price
TM500A	Accumulating amp/hr system monitor for 12, 24 and 48* volt DC systems, displays percentage of battery power remaining (comes with 500 amp shunt and 50' cable)	$245.00
TM500A - NS	Amp/hr voltage system meter for 12, 24 and 48* volt DC systems, displays percentage of battery power remaining (no shunt - requires 500 amp/50 mv Deltec shunt)	$195.00
TM-48	48 VDC adapter for TM500A & TM500A-NS	$40.00
TC/25	25' remote control cable to enable inverter on/off function on your TM500A	$22.00
Link 10 Standard	Link 10 with 500 amp shunt in a plastic clamshell**	$250.00
Link 10 Choice Features	Link 10 with 500 amp shunt, RS232 serial data output and low battery output in a plastic clamshell	$375.00
Link 10 Deluxe Model	Link 10 with 1000 amp shunt, RS232 serial data output, low battery output, electric vehicle option, 1000 amp option and auto range option in a box	$460.00
* 48 volt DC systems requires the TM-48 adapter
**Call for Link OEM overlays and no shunt options
PROSINE SERIES INVERTERS		Top
The PROsine Series offers sine wave inverter output in a compact, lightweight, high frequency switching design. The PROsine solves load incompatibility at a value price. Ideal for small systems or as an add-on to existing modified sine wave installations. Models are available with convenience outlets or with AC hardwire terminals and integrated transfer relay. All PROsine inverter models come standard with a built-in backlit LCD display. Shelf or wall mount: 4.5" high (11.43 cm) x 11.5" wide (29.21 cm) x 15.4" deep (39.12 cm)  PROsine 1000 models unit weight: 14.5 lb (6.57 kg)  PROsine 1800 models unit weight: 16.5 lb (7.48 kg)
Model	Description	List Price
PROsine 1000	1.0 kVA - 12 VDC input, 120 VAC 60Hz output, and dual GFCI convenience outlets	$860.00
PROsine 1000 HW/TR	1.0 kVA - 12 VDC input, 120 VAC 60Hz output, and 15 amp AC transfer relay	$910.00
PROsine 1000/24V	1.0 kVA - 24 VDC input, 120 VAC 60Hz output, and dual GFCI convenience outlets	$950.00
PROsine 1000/24V HW/TR	1.0 kVA - 24 VDC input, 120 VAC 60Hz output, and 15 amp AC transfer relay	$1000.00
PROsine 1800	1.8 kVA - 12 VDC input, 120 VAC 60Hz output, and dual GFCI convenience outlets	$1250.00
PROsine 1800 HW/TR	1.8 kVA - 12 VDC input, 120 VAC 60Hz output, and 15 amp AC transfer relay	$1300.00
PROsine 1800/24V	1.8 kVA - 24 VDC input, 120 VAC 60Hz output, and dual GFCI convenience outlets	$1380.00
PROsine 1800/24V HW/TR	1.8 kVA - 24 VDC input, 120 VAC 60Hz output, and 15 amp AC transfer relay	$1430.00
PROsine 1000i	1.0 kVA - 12 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet	$860.00
PROsine 1000i HW/TR	1.0 kVA - 12 VDC input, 230 VAC 60Hz output, and 10 amp AC transfer relay	$960.00
PROsine 1000i/24V	1.0 kVA - 24 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet	$950.00
PROsine 1000i/24V HW/TR	1.0 kVA - 24 VDC input, 230 VAC 60Hz output, and 10 amp AC transfer relay	$1050.00
PROsine 1800i	1.8 kVA - 12 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet	$1250.00
PROsine 1800i HW/TR	1.8 kVA - 12 VDC input, 230 VAC 60Hz output, and 10 amp AC transfer relay	$1350.00
PROsine 1800i/24V	1.8 kVA - 24 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet	$1370.00
PROsine 1800i/24V HW/TR	1.8 kVA - 24 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet	$1470.00
PROsine Remote Interface	Allows LCD panel to be removed - includes 25' of cable and replacement on/off switch panel for inverter cavity	$50.00
PROSINE SERIES INVERTER/CHARGERS		Top
The PROsine Series offers bi-directional sine wave inverter/charger functionality with all the benefits of a lightweight, high frequency design. Ideal for backup power and off grid applications where space is a premium. All PROsine inverter/chargers are CSA listed to UL standards and come packaged with a user friendly remote display panel. PROsine 2.0 Shelf or wall mount: 5.7" high (14.48 cm) x 11.2" wide (28.45 cm) x 17.7" deep (44.96 cm) Unit Weight: 24 lb (10.89 kg) PROsine 2.5 and 3.0 Wall mount: 20" high (50.8 cm) x 15" wide (38.1 cm) x 7" deep (17.78 cm) Unit Weight: 32 lb (14.51 kg)
Model	Description	List Price
PROsine 2.0	2.0 kVA - 12 VDC input, 120 VAC 60Hz output with 100 amp charger, 30 amp AC transfer relay, temp sensor, and remote display panel	$1999.95
PROsine 2.5	2.5 kVA - 12 VDC input, 120 VAC 60Hz output with 100 amp charger, 30 amp AC transfer relay, temp sensor, and standard remote display panel	$2599.95
PROsine 2.5/24V	2.5 kVA - 24 VDC input, 120 VAC 60Hz output with 100 amp charger, 30 amp AC transfer relay, temp sensor, and standard remote display panel	$2859.95
PROsine 3.0	3.0 kVA - 12 VDC input, 120 VAC 60Hz output with 120 amp charger, 30 amp AC transfer relay, temp sensor, and Advanced Control System (ACS) panel	$2999.95
PROsine 3.0/24V	3.0 kVA - 24 VDC input, 120 VAC 60Hz output with 60 amp charger, 30 amp AC transfer relay, temp sensor, and Advanced Control System (ACS) panel	$3299.95
ACS Remote	Optional LCD Remote for PROsine 2.5, standard with 3.0	$249.95
T240 AUTOTRANSFORMER		Top
UL Listed step-up/step-down autotransformer or balancing transformer. Includes built-in dual pole 25 amp circuit breaker disconnect. Rated for 3900 watts (3.9 kVA) continuous output.
Model	Description	List Price
T240	120-240 volt step-up or step-down transformer, maximum continuous power, 3.9 kVA	$350.00
PORTAWATTZ HIGH FREQUENCY SERIES		Top
The high frequency Portawattz Series is compact, lightweight, and easy to install and operate. These proven, modified sinewave inverters are ideal for a variety of portable and light to medium duty installed applications. All feature point-of-use convenience AC outlets, simplified DC connections, and a variety of DC and AC side protection features.
Model	Description	List Price
Portawattz 150	150 VA - 12 VDC input, 120 VAC 60 Hz output, single AC outlet, on / off switch, and DC lighter plug connector	$39.95
Portawattz 300	300 VA - 12 VDC input, 120 VAC 60 Hz output, dual AC outlets, on / off switch, and DC lighter plug connector	$49.95
Portawattz 400	400 VA - 12 VDC input, 120 VAC 60 Hz output, dual AC outlets, on / off switch, and DC clip lead connectors	$69.95
Portawattz 600	600 VA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, and DC terminals	$109.95
Portawattz 700	700 VA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, and DC terminals	$119.95
Portawattz 1000	1.0 kVA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, DC terminals, and voltage and current led bar graphs	$269.95
Portawattz 1750	1.75 kVA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, DC terminals, and voltage and current led bar graphs	$379.95
Portawattz 3000	3.0 kVA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, DC terminals, and voltage and current led bar graphs	$599.95
XPOWER ELECTRONIC BACKUP POWER GENERATORS		Top
Emergency backup power and convienient mobility sums up the xPower line - the electronic generator is portable and rechargeable. The xPower features an integrated, dual outlet, high frequency inverter and AGM battery. It can be used for a variety of AC and DC loads. Standard accessories include a handy DC flourescent light, AC charger, DC to DC charging cable, and accessory case. xPower 300: Dimensions: 9.4" high (23.9 cm) x 5.7" wide (14.5 cm) x 12.6" deep (32 cm) Unit weight: 17.6 lb (7.98 kg) xPower 600: Dimensions: 11.5" high (29.21 cm) x 15.8" wide (40.13 cm) x 14.8" deep (37.59 cm) Height with handle attached: 35.5" Unit weight: 47 lb (21.32 kg)
Model	Description	List Price
xPower 300	300 VA, 120 VAC 60 Hz modified sine wave inverter, 21 amp-hour sealed battery, 500 mA charger	$149.95
xPower 600	600 VA, 120 VAC 60 Hz modified sine wave inverter, 40 amp-hour sealed battery, 5 amp charger	$279.95
MULTI-STAGE BATTERY CHARGERS		Top
Truecharge battery chargers offer the accuracy of microprocessor controlled, multi-stage charging found on Xantrex's inverter/chargers with the size and weight advantage of a high frequency design. Truecharge features include user selectable battery profiles, temperature compensation, and multiple battery bank output. Ideal for deep cycling and continuous battery backup applications.
Model	Description	List Price
Truecharge 10TB	10 amps at 12 volts output, 2-bank DC hardwire, 90 to 135 VAC input, flooded and gel charge profile settings, manual temperature compensation	$199.95
Truecharge 10	10 amps at 12 volts output, 1-bank clip lead, 90 to 135 VAC input, flooded and gel charge profile settings	$269.95
Truecharge 20+	20 amps at 12 volts output, 3-bank DC hardwire, 90 to 135 VAC input, flooded and gel charge profile settings, manual temperature compensation (automatic with sensor)	$429.95
Truecharge 40+	40 amps at 12 volts output, 3-bank DC hardwire, 90 to 135 VAC input, flooded and gel charge profile settings, manual temperature compensation (automatic with sensor)	$579.95
Temperature Sensor	Remote battery temperature sensor for TC20+/40+	$29.95
TC 20+ Remote Panel	Bar graph LED remote display for TC20+	$39.95
TC 40+ Remote Panel	Bar graph LED remote display for TC40+	$39.95
SOLAR CHARGE CONTROLLERS		Top
These silent, Pulse Width Modulated, field adjustable controllers work as a solar charge controller or a DC load controller or a diversion controller. Each controller comes with a status LED, electronic overcurrent protection, manual, automatic equalization mode, and adjustable setpoints.
Model	Description	List Price
C12	12 amp, 12 VDC - For use as a solar or load or lighting controller	$110.00
C35	35 amp, 12 or 24 VDC New, lower price	$119.00
C40	40 amp, 12, 24 or 48 VDC New, lower price	$159.00
C60	60 amp, 12 or 24 VDC New, lower price	$199.00
CM	Digital meter mounts onto the front of the charge controller - displays volts, amps and cumulative amp hours (resettable) for a solar array, DC loads or diversion loads (depends on application) (formerly DVM/C40)	$99.00
CM/R-50	Remote display for the C35, C40 or C60 with 50' (15 m) communications cable for remote installation (formerly C40R-50)	$126.00
CM/R-100	Remote display for the C35, C40 or C60 with 100' (31 m) communications cable for remote installation (formerly C40R-100)	$146.00
BTS/15	Battery Temperature Sensor for DR, SW, PS and UX Series inverters, and C12, C35, C40 and C60 solar charge controllers - 15' (5 m) cable	$29.00
BTS/35	Battery Temperature Sensor with 35' (11 m) cable (included standard on Power Panel and Power Module systems)	$32.00
DC DISCONNECTS AND OPTIONS		Top
The DC rated circuit breaker/disconnect with indoor enclosure ensures your installation complies with NEC and other safety standard requirements. Designed to work specifically with Trace™ SW, PS and DR Series inverters and most solar charge controllers for residential and commercial applications. Optional second inverter breaker grounding/bonding block and circuit breaker allow field customization. ETL Listed.
Model	Description	List Price
DC250	250 amp breaker with enclosure. For SW4024, SW5548, PS2212, PS2512, DR3624 and DR2412 (Use #4/0 AWG cable min.)	$329.00
DC175	175 amp breaker with enclosure. For SW4048, PS2524, DR1512, DR1524 and DR2424 (Use #2/0 AWG cable min.)	$329.00
GJ250	Additional 250 amp breaker (field installable) for a second, stacked or unstacked SW or DR inverter	$195.00
GJ175	Additional 175 amp breaker (field installable) for a second, stacked or unstacked SW or DR inverter	$195.00
DCBB	Negative/ground bonding block - connects up to two #4/0 AWG negative cables and various ground system cables	$50.00
CD60DC	60 amp circuit breaker for solar array input disconnect for a C40 (mounts on side of DC250/175)	$39.00
CD15	15 amp circuit breaker for small DC load - mounts on side knockout of DC disconnect enclosure	$29.00
CD20	20 amp circuit breaker for small DC load - mounts on side knockout of DC disconnect enclosure	$29.00
TCB - PV COMBINER BOX		Top
Meets the UL requirement for series fusing of PV modules when connected in parallel to form larger arrays. Accommodates 10 PV input circuits fused at up to 15 amps per circuit. Maximum total continuous current rating of the TCB is 80 amps at 12, 24 or 48 VDC. Fuses sold separately.
Model	Description	List Price
TCB6	PV Combiner Box, 6 fused circuits (fuses not included), 80 amp continuous output rating, NEMA 3R enclosure, CSA listed to CSA and UL standards.	$199.00
TCF/100xx	Bulk packed Trace Combiner Box Fuses, packaged 100 fuses per pack	$68.00
POWER METERS		Top
The Trace line of power meters offers tools for the pro solar dealer/installer. Don't guess at system load requirements - measure them. The meters record events on four channels for days or weeks, allowing accurate readings for an entire house or with individual circuits measured separately. The data can be downloaded on site or remotely with the optional modem. Battery or standard wall outlet operation.
Model	Description	List Price
Power Tracer	Recording poly phase power meter for assisting the professional power system designer - measures, calculates and records V, A, kVA, kW, VARS, PF, and THD over time (current transducers not included)	$1,240.00
CT15	15 amp split core current transducer	$110.00
CT70	70 amp split sore current transducer	$110.00
CT150	150 amp clamp-on current transducer	$280.00
Line Logger	Measures instantaneous volts and watts, then records cumulative kWh for loads operating on standard 120 VAC wall outlets	$370.00
BATTERY CABLES		Top
Pre-cut and crimped, UL Listed cable reduces system installation time, improves system integrity and assures code compliance. These flexible cables are made with ring terminals and color-coded heatshrink. NEC rated in conduit for 230 amp (#4/0 AWG), 175 amp (#2/0 AWG) and in free air for 360 amp (#4/0 AWG) or 265 amp (#2/0 AWG). Cables sold as pairs except BC1.5 models which are sold as single jumpers.
Code to Battery Cables BC 3 R/B X/0 Cable Length Color Gauge
Model	Description	List Price
BC3-2/0	3 feet (0.9 m.), red and black heatshrink	$59.00
BC5-2/0	5 feet (1.5 m.), red and black heatshrink	$79.00
BC10-2/0	10 feet (3.0 m.), red and black heatshrink	$129.00
BC3-4/0	3 feet (0.9 m.) red and black heatshrink	$79.00
BC5-4/0	5 feet (1.5 m.), red and black heatshrink	$105.00
BC10-4/0	10 feet (3.0 m.), red and black heatshrink	$169.00
BC15-4/0	15 feet (4.5 m.) red and black heatshrink	$200.00
BC1.5B-2/0	1.5 foot (0.5 m.) black heatshrink (-)	$18.00
BC1.5RB-2/0	1.5 foot (0.5 m.) red/black heatshrink (+/-)	$18.00
BC1.5R-4/0	1.5 foot (0.5 m.) red heatshrink (+)	$22.00
BC1.5B-4/0	1.5 foot (0.5 m.) black heatshrink (-)	$22.00
BC1.5RB-4/0	1.5 foot (0.5 m.) red/black heatshrink (+/-)	$22.00
GROUND FAULT PROTECTION		Top
This UL Listed, ground fault protection device is required for residential photovoltaic rooftop installation on homes in the US. Does not include an enclosure. 100 amp DC max per pole.
Model	Description	List Price
PVGFP1	One pole for one solar array.	$275.00
PVGFP2	Two pole for two solar sub-arrays.	$325.00
PVGFP3	Three pole for three solar sub-arrays.	$375.00
PVGFP4	Four pole for four solar sub-arrays.	$425.00
FUSE BLOCKS AND FUSES		Top
Model	Description	List Price
Fuseblock with a DC rated, UL listed, high current class-T fuse in a protective holder with a removable cover and set screw lug for bare cables (includes fuse).
TFB110C	110 Amp Class T Fuse with set screw lug	$53.00
TFB200C	200 Amp Class T Fuse with set screw lug	$53.00
TFB300C	300 Amp Class T Fuse with set screw lug	$75.00
TFB400C	400 Amp Class T Fuse with set screw lug	$75.00
Fuseblock with a DC rated, UL listed, high current class-T fuse in a protective holder with a removable cover and stainless steel studs for cables with ring lugs (includes fuse).
TFB110	110 Amp Class T Fuse with studs	$53.00
TFB200	200 Amp Class T Fuse with studs	$53.00
TFB300	300 Amp Class T Fuse with studs	$75.00
TFB400	400 Amp Class T Fuse with studs	$75.00
Replacement fuses for use with TFB and TFBxxxC fuseblocks.
TF110	110 Amp Class T replacement fuse	$18.00
TF200	200 Amp Class T replacement fuse	$18.00
TF300	300 Amp Class T replacement fuse	$38.00
TF400	400 Amp Class T replacement fuse	$38.00
POWER PANEL SYSTEMS		Top
SW Series Power Panels A complete, pre-assembled electrical system which is factory built and NEC compliant. Power Panels are ETL listed to UL and CSA standards for stand-alone, utility-interactive and backup power applications Sine Wave (SW Series) Power Panels include: SW Series Inverter/Charger(s), with built-in automatic transfer relay(s)  175 or 250 amp DC disconnect breaker(s) with enclosures  60 amp AC input/output/bypass breaker(s) with enclosures  500 amp/50 mV shunt for optional TM500 meter  AC and DC completely prewired in conduit (except battery cables)  Mounted on powder coated steel back-plate 40"L x 43"W x 10"H (100 cm L x 107.5 cm W x 25 cm H)  Shipping size: Plywood Crate 47"L x 44"W x 19"H (117.5 cm L x 110 cm W x 47.5 cm H)  Shipping weight: 256 to 456 lbs (116 kg to 207 kg) Depending on Model
PP-SW4024/S	4.0 kVA - 24 VDC input, 120 VAC 60 Hz output, single SW4024 inverter, 120 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$4995.00
PP-SW4024/D	8.0 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual SW4024 inverters, 120 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$8995.00
PP-SW4048/S	4.0 kVA - 48 VDC input, 120 VAC 60 Hz output, single SW4048 inverter, 60 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5059.00
PP-SW4048/D	8.0 kVA - 48 VDC input, 120/240 VAC 60 Hz output, dual SW4048 inverters, 60 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$9137.00
PP-SW5548/S	5.5 kVA - 48 VDC input, 120 VAC 60 Hz output, single SW5548 inverter, 75 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5695.00
PP-SW5548/D	11.0 kVA - 48 VDC input, 120/240 VAC 60 Hz output, dual SW5548 inverters, 75 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$9995.00
ABOVE FOR USE WITH NORTH AMERICAN APPLICATIONS ONLY
PP-SW3024E/S	3.3 kVA - 24 VDC input, 230 VAC 50 Hz output, single SW3024E inverter, 100 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5049.00
PP-SW3048E/S	3.3 kVA - 48 VDC input, 230 VAC 50 Hz output, single SW3048E inverter, 50 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5049.00
PP-SW4548E/S	4.5 kVA - 48 VDC input, 230 VAC 50 Hz output, single SW4548E inverter, 60 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5695.00
ABOVE FOR USE WITH EUROPEAN APPLICATIONS ONLY
NOTE: Some E version Power Panels are available with dual inverters configured for twice the output at 230 VAC 50 Hz. Call your Trace reseller for more details on these models.
DR Series Power Panels A complete, pre-assembled electrical system which is factory built and NEC compliant. Power Panels are ETL listed to UL and CSA standards for stand-alone and backup power applications. DR Series Power Panel include: DR Series Inverter/Charger(s), with built-in automatic transfer relay(s)  175 or 250 amp DC disconnect breaker(s) with enclosures  60 amp AC disconnect/bypass breaker(s) with enclosures  500 amp/50 mV shunt for optional TM500 meter  AC and DC completely prewired in conduit (except battery cables)  Mounted on powder coated steel back-plate 40"L x 43"W x 8.25"H (100 cm L x 107.5 cm W x 20.6 cm H)  Shipping size: Plywood Crate 47"L x 44"W x 19"H (117.5 cm L x 110 cm W x 47.5 cm H)  Shipping weight: 199 to 266 lbs (91 to 121 kg) Depending on Model
PP-DR1512/S	1.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR1512 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$1979.00
PP-DR1512/D	3.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR1512 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers	$3637.00
PP-DR1524/S	1.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR1524 inverter, 35 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$1879.00
PP-DR1524/D	3.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR1524 inverters, 35 amp X 2 chargers, internal 30 amp automatic transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$3529.00
PP-DR2412/S	2.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR2412 inverter, 120 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$2295.00
PP-DR2412/D	5.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR2412 inverters, 120 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers	$4337.00
PP-DR2424/S	2.4 kVA - 24 VDC input, 120 VAC 60 Hz output, single DR2424 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$2295.00
PP-DR2424/D	4.8 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual DR2424 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$4337.00
PP-DR3624/S	3.6 kVA - 24 VDC input, 120 VAC 60 Hz output, single DR3624 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$2529.00
PP-DR3624/D	7.2 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual DR3624 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers	$4795.00
ABOVE FOR USE WITH NORTH AMERICAN APPLICATIONS ONLY
PP-DR1512E/S	1.5 kVA - 12 VDC input, 230 VAC 50 Hz output, single DR1512E inverter, 70 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$1979.00
PP-DR1524E/S	1.5 kVA - 24 VDC input, 230 VAC 50 Hz output, single DR1524E inverter, 35 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$1879.00
PP-DR2424E/S	2.4 kVA - 24 VDC input, 230 VAC 50 Hz output, single DR2424E inverter, 70 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$2295.00
ABOVE FOR USE WITH EUROPEAN APPLICATIONS ONLY
Power Panel Options (PPO) The following items are NOT included standard with Power Panels, they must be ordered in addition to the Power Panel. All options may be installed on SW or DR series Power Panels
PPO-C40	C40 DC charge or load or diversion controller, installed complete with prewired 60 amp DC breaker	$258.00
PPO-DVM/C40	Accumulating amp hour meter with LCD display, installed on the front of the C40 (monitors power flowing through C40)	$99.00
PPO-CD15	15 amp DC load breaker, pre-wired and installed in the DC disonnect	$59.00
PPO-CD20	20 amp DC load breaker, pre-wired and installed in the DC disconnect	$59.00
PPO-CD60	60 amp DC load breaker, pre-wired and installed in the DC disconnect	$59.00
PPO-BC5-2/0	5 foot (1.5m) 2/0 AWG battery cable pair with ring terminals (battery side only) and 2 foot (.6m) flexible conduit*	$83.00
PPO-BC10-2/0	10 foot (3m) 20 AWG battery cable pair with ring terminals (battery side only) and 7 foot (2.2m) flexible conduit*	$132.00
PPO-BC5-4/0	5 foot (1.5m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 2 foot (.6m) flexible conduit*	$115.00
PPO-BC10-4/0	10 foot (3m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 7 foot (2.2m) flexible conduit*	$182.00
PPO-BC15-4/0	15 foot (4.5m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 12 foot (3.7m) flexible conduit*	$200.00
PPO-SB	Heavy duty plastic shipping container, excellent for making a battery box	$359.00
NOTE: * Flexible conduit is shorter than battery cables to allow for extra cable length inside the battery enclosure and the disconnect switch. All Power Panels are prewired for the installation of the TM500 system monitor. 48 VDC models require the TM48 adaptor.

Please Note: All prices and specifications are subject to change without notice.

---